Correcting UCC Server Dialog Box Size

The attached Tech Tip provides the steps for correcting the Dialog box errors in the UCC Server:

• Related Articles

• Renishaw's PH20 Best Practice User Guide

  Case: We often get asked questions regarding the PH20, like what probe modules are supported, how long of a stylus can be used, and is a star or knuckle probe supported. Well, linked below is a guide you can reference to answer all of those questions ...

• Renishaw PH10 motorized head communication settings for Universal CMM

  Case: How to determine the Baud rate on a PHC10-2. Similar Case: Universal CMM will not connect, error message regarding probe head communication. Solution: 1. Access the back of the PHC10-2 and note the configuration of switches 1 through 3. Only ...

• How to update a USB NetHASP

  Case: How do you update the license code on a USB NetHASP device? Similar Case: The product set or maintenance date of a license has changed, and the license needs to be updated to reflect this. If Windows does not show this file association, then ...

• Leica ATS600 Users Guide

  Connecting the Leica ATS600 In Verisurf, you use the Leica Absolute Tracker Interface within the Device Setup to connect the ATS600. Enter the IP address from the ATS600 Controller display in the Device IP Address field by selecting Edit and then ...

• Compensating For Thermal Expansion - After Measurement

  If the object’s temperature changes after applying the material compensation and measuring points and features, it is possible to correct the previously measured points and features for the scale variances. This process involves using the Temperature ...