Enabling Dedicated Graphics for AMD (Radeon) Cards

Enabling Dedicated Graphics for AMD (Radeon) Cards

Case:

I have an AMD graphics card and Mastercam will not run.

Cause:

Mastercam will not run because it is not using the dedicated graphics card.

Solution:

Using the Radeon Pro software, register Mastercam and set it up to run with the dedicated graphics card. The steps are below.

  1. Open the Radeon Pro software by right-clicking on the desktop and choosing AMD Radeon Pro and AMD FirePro Settings.

  2. Click System.

  3. Click Switchable Graphics.

  4. Click Running Applications.

  5. Select Installed Profiled Applications.

  6. Click Browse.

  7. Navigate to the Mastercam install folder and choose Mastercam.exe.
  8. Select the Mastercam.exe dropdown.

  9. Choose High Performance.


If additional assistance is still required after performing these steps, please call Verisurf Support at 1-888-713-7201

    • Related Articles

    • Verisurf GPU Recommendation Guide

      Case: What graphics card should I get? Cause: Verisurf recommended graphics cards. Solution:  Would you recommend this Nvidia GTX card? It’s advised to steer away from GTX or Radeon Graphics cards, which are optimized for Gaming. ·         Mastercam ...

    • 4K and High Resolution Displays | Verisurf Graphics, Buttons, and Icons Too Small and Truncated Text including VDI

      Case: On systems that are using high-resolution monitors (4K displays, 21:9 ultra-wide monitors), buttons, text, and images can appear to be truncated or shifted out of place from where they should be. Cause: The issue is not the resolution (number ...

    • System Requirements for Verisurf

      Case: What are the system requirements for Verisurf? Solution: For current system requirements, please visit our website, www.verisurf.com Verisurf Software System Requirements*Need Help Deciding? Verisurf Minimum Probing System Requirements Verisurf ...

    • The what, when, how, and why with Closed Face Reflector and Enabling a Vector Offset in Verisurf for Laser Trackers

      Case: The what, when, how, and why with Closed Face Reflectors and Enabling a Vector Offset in Verisurf for Laser Trackers What: Closed Face Reflectors cause refraction (deflection) when passing through the Face of the Reflector, resulting in the ...

    • Leica ATS600 Users Guide

      Connecting the Leica ATS600 In Verisurf, you use the Leica Absolute Tracker Interface within the Device Setup to connect the ATS600. Enter the IP address from the ATS600 Controller display in the Device IP Address field by selecting Edit and then ...