Hexagon, Brown and Sharpe, and DEA Controllers supported by Universal CMM

Hexagon, Brown and Sharpe, and DEA Controllers supported by Universal CMM

Case:

How to determine the controller model number based on the manufacturer's part number.

DC240 controllers part number:
G580000xx - DC240C controller cabinet EEC version (white color)
G580001xx - DC240C controller cabinet US version.
 
DC241 controllers part number:
G58002000 - DC241 controller cabinet EEC version (white color)
G58002100 - DC241 controller cabinet US version.
 
DC800C controllers part number:
G580010xx - DC800C controller cabinet EEC version (white color)
G580011xx - DC800C controller cabinet US version.
 
FBII controller part number:
G59845900 -  FBII controller cabinet EEC version (grey color)
 
B3C-LC controller part number:
G55140000 -  B3C-LC controller cabinet EEC version (grey color)

RC1 controller part number:
G55240300 -  RC1 controller cabinet EEC version (grey color)

If additional assistance is required, please call Verisurf Support at 1-888-713-7201

    • Related Articles

    • How to load a Universal CMM license

      Dear Verisurf customer, To ensure proper installation and configuration of Universal CMM, please review the following step-by-step guide before beginning the installation. Universal CMM Installation Instructions NOTE: Your organization may require ...

    • Renishaw PH10 motorized head communication settings for Universal CMM

      Case: How to determine the Baud rate on a PHC10-2. Similar Case: Universal CMM will not connect, error message regarding probe head communication. Solution: 1. Access the back of the PHC10-2 and note the configuration of switches 1 through 3. Only ...

    • Technical Tip - VDI Device List January 2021 working

      Verisurf Device Interface – Supported Device List The current list of supported devices VDI 3.45.xxxxx Device Type Model Additional Details Laser Trackers API Laser Trackers Radian, I-Probe 360, I-Scan 360 API OT2 Core API Omnitrac - II w/V-Probe ...

    • Technical Tip - Locating the Equator's ERQ-6 Tool Rack

      TECH TIP – LOCATING THE EQUATOR'S ERQ-6 TOOL RACK The ERQ-6 tool Rack is not a permanently located fixture and, if moved, requires its new location to be registered within the UCC Server Software. Use easily removable tape to hold back all six ...

    • Technical Tip - Verisurf NIST Test

      TECH TIP – VERISURF NIST TEST The NIST Test is in the Measure Ribbon Bar under the Report controls. Select to execute a Digital Artifact Verification Process that tests and verifies the algorithms Verisurf Software uses. The United States of ...