Hosting a Networkable Software License
Case:
How to install and host a networkable software license
Similar Case:
Troubleshooting a networkable software license.
Solution Server Instructions:
1. Install the following on the server
2. Launch the CodeMeter
Control Center from your system tray
3. Click WebAdmin
4. Select Configuration followed by Server
5. Select Enable followed by Apply
6. Select the Dashboard tab
and write down or save the IP address of the server. You will need this
when setting up the client workstation.
Client Workstations Instructions (repeat steps below on all client workstations that require access to Verisurf:
1. Launch the CodeMeter Control Center from your system tray
2. Click WebAdmin
3. Select Configuration followed by add new Server
4. Enter the IP address of the server from step 5 of Server
instructions above followed by selecting Add
5. Select Apply and you should now
be able to use Verisurf on the client workstation
If additional assistance is still required after performing these steps, please call Verisurf Support at 1-888-713-7201