How to load a Universal CMM license

How to load a Universal CMM license

Dear Verisurf customer,

To ensure proper installation and configuration of Universal CMM, please review the following step-by-step guide before beginning the installation.

Universal CMM Installation Instructions

NOTE: Your organization may require System Administrator Level Access to install new software on any computer system.

1.       Download Universal CMM

a.       Make sure you have internet access and sufficient System Level Access to the PC on which you plan to install Universal CMM

b.       Once downloaded, you will need to extract the contents on the application PC

2.      Install Universal CMM

a.       Right mouse click on the setup.exe and select “Run as administrator”

3.      Enter License Key

a.       Select Close and launch the CMMediator application from the desktop

b.       Paste the License Key in CMMediator License Notification Dialog and select Get License

License Information

NOTE: The Universal CMM license file is unique to the PC and cannot be transferred.

•         Verisurf 2020 or later must be installed on the PC to run Universal CMM.

•         VDI 3.45.0 or later I++ CMM Interface must be installed on the PC to run Universal CMM.

Need Help?

Please don’t hesitate to contact us if you encounter any problems installing, licensing, configuring, or using any portion of the Universal CMM solution.

•         Support Email: support@verisurf.com

•         Toll-free technical telephone support: (888)713-7201



    • Related Articles

    • Renishaw PH10 motorized head communication settings for Universal CMM

      Case: How to determine the Baud rate on a PHC10-2. Similar Case: Universal CMM will not connect, error message regarding probe head communication. Solution: 1. Access the back of the PHC10-2 and note the configuration of switches 1 through 3. Only ...

    • Hexagon, Brown and Sharpe, and DEA Controllers supported by Universal CMM

      Case: How to determine the controller model number based on the manufacturer's part number. DC240 controllers part number: G580000xx - DC240C controller cabinet EEC version (white color) G580001xx - DC240C controller cabinet US version. DC241 ...

    • Cannot Activate Software License

      Case: A software license broke for a single seat or a network license, and running the wizard to activate it again fails to complete successfully. Cause: One of the hardware or software binding pieces for the license changed, causing the license to ...

    • Hosting a Networkable Software License

      Case: How to install and host a networkable software license Similar Case: Troubleshooting a networkable software license. Solution Server Instructions: 1. Install the following on the server Codemeter 7.40a Installation MastercamLicensingSetup062722 ...

    • Creating a CMDust log to troubleshoot a broken Software License

      Case: A software license broke for a single seat or a network license, and running the wizard to activate it again fails to complete successfully. Cause: One of the hardware or software binding pieces for the license changed, causing the license to ...