Working with UCC Servicer Offline Shortcut extensions

Renishaw UCC Servicer offline is used to simulate CMM environments to aid in proving/troubleshooting CMM Programs.

Once installed, the UCC Server desktop icon target must be edited to enable the offline version to work.

Right-click the desktop icon, then select Properties from the list.

In the Target box, add the target extensions required for the offline version to operate.

Below are the extensions, each with a description.

Once completed, the target should look like:

"C:\Program Files (x86)\Renishaw\UCC\UCCSERVER\UCCSERVER_59203\UCCSERVER.exe" -advanced -offline -command -extended

-offline: enables offline simulation of the CMM environment. Requires an offline license if operating standalone from the CMM PC. If operating offline on the CMM PC, a standalone offline license is not required.

-advanced: enables the advanced tab for greater access to settings and control over the CMM environment, such as reach angle when calibrating small styli.

-command: enables the command tab to send iOS plus commands from the UCC server without the use of application software such as Verisurf.

-extended: enables an extended list of commands, such as the RW commands, handy to perform head calibrations on PH20 and REVO.

Note:

UCCSERVER_59203 is the installed version; users' versions may differ.

• Related Articles

• Correcting UCC Server Dialog Box Size

  The attached Tech Tip provides the steps for correcting the Dialog box errors in the UCC Server:

• Working with Verisurf remotely Q&A

  Dear Verisurf customer, Here are some common working remote questions and answers you'll want to familiarize yourself with if you are trying to work with Verisurf from a remote location. Working with Verisurf remotely Commonly asked questions and ...

• 4K and High Resolution Displays | Verisurf Graphics, Buttons, and Icons Too Small and Truncated Text including VDI

  Case: On systems that are using high-resolution monitors (4K displays, 21:9 ultra-wide monitors), buttons, text, and images can appear to be truncated or shifted out of place from where they should be. Cause: The issue is not the resolution (number ...

• Reset Operations Manager When Locked Behind Ribbon Bar

  Case: The Operations Manager window gets lost behind the Ribbon Bar. Cause: The GUI interface gets corrupted. Solution: There are three ways to reset the Operation Manager location when it becomes locked behind the main ribbon bar. Method 1.  Use the ...

• The Difference Between a Hardware and a Software Verisurf License

  Table of contents Case: Verisurf hardware and software license confusion. Cause: With the advent of the software license, some confusion may exist with regards to using a hardware (hasp) license and a sofware (haspless) license.   Solution: Verisurf ...