Blue Screen When the Hasp Is Plugged In
When plugging in a Mastercam Hasp, or attempting to install the Driver, a Blue screen will appear and the computer will crash.
This is an error from a Windows 10 Update 2004 build release in May, 2020. A Sentinal driver update is needed.
Download and install the Sentinal driver from here:
If additional assistance is still required after performing these steps, please call Verisurf Support at 1-888-713-7201
Related Articles
The Difference Between a Hardware and a Software Verisurf License
Table of contents Case: Verisurf hardware and software license confusion. Cause: With the advent of the software license, some confusion may exist with regards to using a hardware (hasp) license and a sofware (haspless) license. Solution: Verisurf ...
Working with Verisurf remotely Q&A
Dear Verisurf customer, Here are some common working remote questions and answers you'll want to familiarize yourself with if you are trying to work with Verisurf from a remote location. Working with Verisurf remotely Commonly asked questions and ...
4K and High Resolution Displays | Verisurf Graphics, Buttons, and Icons Too Small and Truncated Text including VDI
Case: On systems that are using high-resolution monitors (4K displays, 21:9 ultra-wide monitors), buttons, text, and images can appear to be truncated or shifted out of place from where they should be. Cause: The issue is not the resolution (number ...
Leica ATS600 Users Guide
Connecting the Leica ATS600 In Verisurf, you use the Leica Absolute Tracker Interface within the Device Setup to connect the ATS600. Enter the IP address from the ATS600 Controller display in the Device IP Address field by selecting Edit and then ...
Installing Verisurf Learning Edition (VLE) 2025
Use the following instructions for downloading and installing the free Verisurf Learning Edition (VLE). 1. Download VLE to a location on your computer. 2. When the download completes, go to the computer location of the download and double left mouse ...